Introduction of the dustproof jacket of the cylinder rod str
Published: 201905-11 Clicks: times
The piston rod of the cylinder is telescopic (the extension and retraction are modified within a certain limit). The shield can effectively protect the components such as the lead screw, the light bar, the cylinder, the cylinder, the screw rod, the piston rod, the mandrel and the column from dust. The external infection and vandalism can be extended or compressed with the components, can be used to protect the volume of debris, and can also bear the weight generated by the debris, either vertical or horizontal. The cylinder piston rod wear ring can improve the guiding of the cylinder, reduce the wear of the piston seal and reduce the frictional resistance. The 45# piston rod supports the connecting parts of the piston work. Most of them are used in the cylinder and cylinder movement executing parts. It is a moving part with frequent movement and high technical requirements. When the hollow piston rods have the same material and the cross-sectional area is equal, the hollow piston rod has stronger torsion resistance and can withstand large external moments. The piston rod of the cylinder has a piston rod at one end, and the air supply from the side of the piston generates air pressure, and the air pressure pushes the piston to generate a thrust and returns by the spring or the self weight. The hydraulic piston rod cylinder, the piston rod (cylinder rod), the piston and the end cover are composed of several parts. Cylinder piston rod telescopic shield has dustproof, waterproof, oil proof, high temperature resistance, heat insulation, anti-aging, anti-emulsion and chemicals, anti-iron filings, anti-splash, anti-dust (morphology: solid particles), anti- Excellent characteristics such as moisture, resistance to stretching, impact without deformation, long use time, extensively used in machine tools, machinery, metallurgy, petroleum, chemical, forging and other industries. Cylinder piston rod telescopic shield is recommended to use plastic (structure: synthetic resin, plasticizer, stable (interpretation: stable stability; no change) agent, colorant) or aluminum support ring to maintain the inside of the shield There is a certain distance between the cavity and the protected part, which prolongs the life of the skin cavity. According to the production process, it can be divided into two methods of high-frequency heat sealing and sewing. The piston rod of the cylinder rod has a wire ring support inside, which can work normally between -40-1100 degrees. It can effectively prevent dust, water, oil, emulsion and chemicals, corrosion resistance and shape. The non-deformable characteristics, based on its rigor and firmness, can also be used for ventilation, dust removal and so on. Cylinder piston rod telescopic protective cover is made of stamped disc, the two inner edges and the two outer edges are combined together, and the better shape stability and horizontal stability can be achieved by sewing. Sewing waterproof sealing sleeve can be divided into integral type, zipper type, gluing type, etc. It can also be detachable with side opening with zipper or gluing according to customer's requirements, which can avoid the trouble of disassembling the customer. Effectively improve the efficiency of the production (Produce). Cylinder Piston Rod Retractable Shield is made of different materials according to the operating environment of the protected parts. There are nylon cloth, insulating coil, rubber cloth, tarpaulin, tarpaulin, high temperature flame retardant cloth, resistant Acid-alkali cloth, canvas, silicon fiberglass cloth, etc., thickness from 0.3mm to 1.5mm. Cylinder piston rod telescopic shield extension and compression ratio (the value obtained from the two numbers) is 100:15, can be folded and stretched at will, can adapt to the harsh environment of high temperature, high pressure, high speed friction of mechanical equipment, It can be produced into cylindrical, cone, square, lighthouse, and polygonal shapes according to customer requirements. Cylinder piston rod telescopic shield has two kinds of connection methods: clamp (gū) connection, flange connection, and gluing connection. The flange material is divided into polyvinyl chloride (polyvinyl chloride) plate flange and metal method. Lan plate.
