your current location:Home>news / Industry Information
-
2019-05-11 | 45# piston rod adopts rolling processing advantages
45#Piston rod As the name implies, it is a connecting part that supports the piston to do work. Most of them are used in the cylinder and cylinder movement executing parts, which is a frequent movement. Highly demanding moving parts. Taking -
2019-05-11 | The characteristics and application range of hydraulic pisto
Hydraulic Piston Rods Hydraulic cylinders can also be made into pistons The structure in which the rod is fixed and the cylinder is connected to the table. The hydraulic cylinder of the hydraulic baler is similar in composition to the doubl -
2019-05-11 | How much do you know about the piston rod?
From the name, we know hydraulic piston rods It is a coupling component that supports the piston to do work. It is applied to the cylinder and cylinder movement implement components, and is a moving component with relatively high motion req -
2019-05-11 | The website of Changzhou Yingweite Machinery Co., Ltd. was s
Changzhou Yingweite Machinery Co., Ltd. specializes in producing all kinds of piston rods, precision piston rods, linear shafts, precision slender shafts, stainless steel shafts, hollow shafts, guide columns and other products. Can be proce -
2019-05-11 | How to choose the blank for the piston rod?
Because the working mode of the piston rod is the reciprocating mode, in order to increase the life of the piston rod and reduce the wear haze of the piston rod, the blank is made of alloy structural steel of 38CrMoAlAn. Because the piston -
2019-05-11 | What are the ways to improve the piston rod tortuosity?
1. Increase the support width, usually supporting the width of the piston rod diameter of 1.2 to 1.5 times. 2. During the installation process, make full use of the adjustment pad to ensure the cooperation gap and alignment between the two -
2019-05-11 | What are the adverse effects of the short piston rod?
We can clean the external appearance of the piston rod, and carefully observe whether the carbon deposit on the top surface is present or not, and see if there is any defect. Under normal circumstances, the top of the piston rod is allowed -
2019-05-11 | What are the accuracy requirements for precision shafts in a
What are the technical requirements for precision slender shafts? 1. Surface roughness of the elongated shaft: The shaft diameter combined with the precision slender shaft and the transmission member is required to be 0.63 m-Ra2.5 on the su
