In fact, there are some problems (Emerson) in the use of the piston rod (guò ché ng), which we all understand, but If he has problems with frequency, then naturally he can't accept it. The hydraulic piston rod cylinder, the piston rod (cylinder rod), the piston and the end cover are composed of several parts. Therefore, we should look for the cause of the cause of this problem. Let's follow us to find the answer. Maybe it will help you.

     
1,  Piston rod installation problem (Emerson)
    When we install the piston rod, naturally we should also know if his concentricity meets the requirements. If it does not meet the requirements, then there will be a PP sheet angle, so There will be folds in the first place, and these problems will have an effect on our use of the piston rod. The hydraulic piston rod improves the surface corrosion resistance and can delay the generation or expansion of fatigue cracks, thereby improving the fatigue strength of the cylinder rod. The hollow piston rod refers to a hollow piston rod having an annular cross section. Of course, if the Condition is serious, the cylinder (compressed air) liquid may also collide with the piston rod, and as a result, there may be a break. In addition, we should also look at whether he is reasonable when designing the piston rod. If it is unreasonable, everything is empty.
      
2,  processing problems of the piston rod
    Many times we need to use piston (piston) rods for processing, then in this process (guò ché ng) we should naturally ensure the combination of filler and base metal, then In this way, we will be more convenient to process, in addition to this we should also look at the error in it, if the error is relatively large, it will have an impact on us. The hydraulic piston rod cylinder, the piston rod (cylinder rod), the piston and the end cover are composed of several parts. The 45# piston rod connects the piston and the crosshead to transmit the force acting on the piston and drive the piston to move. Simply speaking, the operation control of the piston rod is relatively simple, and the hardness is also suitable, so we can use him to do a lot of work, I don't know if you have any problems during the operation (Emerson).
     After reading our introduction to the piston rod, do you have a new understanding of the piston rod? If you want to buy a piston rod, then let's talk with us. Of course, we mainly work in this area, and the quality is guaranteed (the thing that plays a role in safeguarding).

• prev：Why are there impurities in the piston rod?
• next：Why is the piston rod always beating, what is the reason?