It’s undeniable that when we use the piston rod, he has some problems (Emerson), but if we use the piston rod, he is old. There will be beating, and the impact on our work is still relatively large. The 45# piston rod connects the piston and the crosshead to transmit the force acting on the piston and drive the piston to move. In addition, if we want to run the piston rod normally, what are the requirements? Let's take a look at it together.

       
1,   abnormal piston beating
      To say that this piston (piston) rod does have a beating when it is working, but if the beating is not normal, then the impact is quite large. . The cylinder piston rod wear ring can improve the guiding of the cylinder, reduce the wear of the piston seal and reduce the frictional resistance. The 45# piston rod connects the piston and the crosshead to transmit the force acting on the piston and drive the piston to move. The piston rod of the cylinder has a piston rod at one end, and the air supply from the side of the piston generates air pressure, and the air pressure pushes the piston to generate a thrust and returns by the spring or the self weight. So why does the piston rod have a radial run? In fact, the main reason is that the piston rod will have a radial displacement. In addition, the piston rod has a gap or a large gap when it is running. If we have no precision, we can accurately determine it. ), then his level will be biased, the content of these aspects of the website will be beating, if you want to solve it well, then we can start from these aspects.
       
2,  Piston rod operation requirements
     If we want to ensure the requirements of the piston rod processing, then we need to ensure his stability (interpretation: stable stability; no change), and his bearing capacity, we also Should be guaranteed. The 45# piston rod connects the piston and the crosshead to transmit the force acting on the piston and drive the piston to move. When we are processing, we have to use the center hole to locate. This principle can be very good to help us work on the piston rod, which is one of his requirements. Because of the simple structure of the piston rod, his length to diameter ratio will be larger, so that his rigidity will be poor. If we want to guarantee his accuracy (accuracy), then we must minimize it. The deformation (Condition) that he appeared in the homework process (guò ché ng).
     If the content of the above aspects of the website is something we can master (familiar and can use), then we should be able to use the piston rod very well, I don’t know if you have other better methods. Introduction, if there is any, please tell us, I believe it should be very exciting.

• prev：Why is there a damage to the piston rod?
• next：What causes the piston rod to leak?