After we introduced the Piston rod before we saw it, I don’t know if you have any thoughts. The hollow piston rod refers to a hollow piston rod having an annular cross section. Of course, if there is a magazine in the piston rod we use, then we should also look for an answer, and we should also look at his rolling technology. I hope that in our introduction below we will let you find the answer you want.
1. How to solve the impurity problem of the piston rod (Emerson)
In fact, it is quite common to have some damage on the surface of the piston rod, mainly because of some problems that we accidentally cause when we use it (Emerson). Of course, if our piston rods have their guide grooves or cylinder heads that do not meet the corresponding requirements, it will inevitably also fail, mainly to remove oil. If there are some problems with the coating of the piston rod, it is likely that there will be deformation or some impurities in our cylinder. These factors will affect our use of the piston rod. I believe everyone should also It's understandable.
2, Piston rod rolling
I don't know how much you know about rolling out, but we all want to improve the hardness of the piston rod anyway, and we should also guarantee that There is no deformation problem (Emerson) on his surface. The hydraulic piston rod cylinder, the piston rod (cylinder rod), the piston and the end cover are composed of several parts. The hydraulic piston rod improves the surface corrosion resistance and can delay the generation or expansion of fatigue cracks, thereby improving the fatigue strength of the cylinder rod. If we use the rolling method to process, then the stress on the surface of the surface will be able to be handled well (chǔ lǐ) and solved. It can also prevent him from having corrosion problems, which is believed to be more useful for piston rods. In fact, when we use the piston rod to work, we should pay attention to these aspects, and only then can he take longer.
No matter what equipment you use (shè bè i), I hope that he can use it for a little longer, then we will get a little more. The hydraulic piston rod cylinder, the piston rod (cylinder rod), the piston and the end cover are composed of several parts. The 45# piston rod connects the piston and the crosshead to transmit the force acting on the piston and drive the piston to move. If there is any problem in the process of doing the work (guò ché ng) (Emerson), there are quite a few tests for us. I don't know if everyone agrees with it.
You may also be interested in this
Related Reading
