your current location:Home>news
-
2019-05-11 | The website of Changzhou Yingweite Machinery Co., Ltd. was s
Changzhou Yingweite Machinery Co., Ltd. specializes in producing all kinds of piston rods, precision piston rods, linear shafts, precision slender shafts, stainless steel shafts, hollow shafts, guide columns and other products. Can be proce -
2019-05-11 | How to choose the blank for the piston rod?
Because the working mode of the piston rod is the reciprocating mode, in order to increase the life of the piston rod and reduce the wear haze of the piston rod, the blank is made of alloy structural steel of 38CrMoAlAn. Because the piston -
2019-05-11 | What are the ways to improve the piston rod tortuosity?
1. Increase the support width, usually supporting the width of the piston rod diameter of 1.2 to 1.5 times. 2. During the installation process, make full use of the adjustment pad to ensure the cooperation gap and alignment between the two -
2019-05-11 | What are the adverse effects of the short piston rod?
We can clean the external appearance of the piston rod, and carefully observe whether the carbon deposit on the top surface is present or not, and see if there is any defect. Under normal circumstances, the top of the piston rod is allowed -
2019-05-11 | What are the accuracy requirements for precision shafts in a
What are the technical requirements for precision slender shafts? 1. Surface roughness of the elongated shaft: The shaft diameter combined with the precision slender shaft and the transmission member is required to be 0.63 m-Ra2.5 on the su -
2019-05-11 | How to calculate the thrust of the piston rod?
The piston rod is used as an executing component in the cylinder. When the cylinder is working, if it is desired to determine the force of the piston rod to transmit torque and bear the load according to the force required for the work, the -
2019-05-11 | What factors should be considered when using the sealing str
The piston rod is a connecting component that is used in some reciprocating actuators. It mainly needs to withstand a certain axial force and reciprocate at a certain speed to work externally. In this way, it is particularly important to se -
2019-05-11 | The piston rod structure is relatively simple but the aspect
First, process analysis 1. The piston rod is subjected to alternating load during normal use. The sealing device reciprocally rubs the surface at 50mm770mm, so the hardness and wear resistance are required. 2. The structure of the piston ro
