What should I do if the cylinder rod and piston are loose?
Published: 201905-11 Clicks: times
The piston rod of the cylinder is connected to the piston, and we will work very well. The hydraulic piston rod improves the surface corrosion resistance and can delay the generation or expansion of fatigue cracks, thereby improving the fatigue strength of the cylinder rod. The hydraulic piston rod cylinder, the piston rod (cylinder rod), the piston and the end cover are composed of several parts. The hollow piston rod refers to a hollow piston rod having an annular cross section. The 45# piston rod supports the connecting parts of the piston work. Most of them are used in the cylinder and cylinder movement executing parts. It is a moving part with frequent movement and high technical requirements. The 45# piston rod connects the piston and the crosshead to transmit the force acting on the piston and drive the piston to move. Then the problem (Emerson) is coming, the cylinder rod and piston connection are loose. Please refer to the following methods, it will be helpful. Relief measures for the loose connection between the piston rod and the piston of the cylinder (the solution to the problem): Design the thread structure, and the end is locked with a large nut. Relief measures for the loose coupling between the piston rod and the piston of the cylinder: Use a small screw to fasten the thread connecting the piston and the piston rod. Relief measures for the loose connection between the piston rod and the piston of the cylinder: a small skirt is left at the front end of the piston, a small notch is left on the piston rod, and then the skirt is struck. The cylinder rod and the piston are connected to each other. The piston rod and the piston are loosely connected. The fourth step is to use the thread glue directly. Hydraulic cylinder Under normal working conditions, the piston and the piston rod are threaded. However, when the working pressure is relatively high or the load is large and the diameter of the piston rod is small (Condition), the thread of the piston rod may be overloaded. In addition, when the working machine vibration is large, the nut of the fixed piston may vibrate, so a non-threaded connection is required. The cylinder rod and the piston are loosely connected. How do you read the above rescue measures and know how to save it?
