To say that this method of piston (Piston) rod processing is really a lot, I don't know how everyone usually do it, but if you want to electroplate and install it, then we should also regard this aspect. The content of the content is better (Find out). When the hollow piston rods have the same material and the cross-sectional area is equal, the hollow piston rod has stronger torsion resistance and can withstand large external moments. The hollow piston rod refers to a hollow piston rod having an annular cross section. I hope that after reading our introduction, everyone can work very well on the piston rod. Do you hope so too?
 
1,   What are the characteristics of the piston rod?
Many times we will electroplate the piston rod, which is to give him better corrosion resistance, so we also hope that his characteristics will be more comprehensive. For example, his cathode current can be used very well, his deposition is faster, the thickness of the coating is average, and there is good wear resistance. These advantages are helping us. To complete the operation of the piston rod. Of course, we have to inspect him before we work on him to see how his size and surface condition are, and we can polish his surface if needed.
 
2,  the material of the piston rod
Usually we use our piston rods in cylinders (compressed air) or in cylinders. Of course, he can also use them in other places, so we should make sure that they don't loosen when they work. If there is a problem with his quality (Emerson), it will also have an impact on our use. The hydraulic piston rod improves the surface corrosion resistance and can delay the generation or expansion of fatigue cracks, thereby improving the fatigue strength of the cylinder rod. Therefore, we choose (xuanze) a good piston material (Material) is more important to us. Because the materials we use are different on different substances, so we have to distinguish them when we choose. If we make a mistake, it is not good.
 
Everyone needs to know that when we use the piston rod, we can't let him corrode. If there is, we should also try to eliminate it. This situation will cause no small trouble for us. If the situation is serious, The trouble that comes with it is even bigger. We still have to do a good job of maintaining him. The hydraulic piston rod cylinder, the piston rod (cylinder rod), the piston and the end cover are composed of several parts. The 45# piston rod supports the connecting parts of the piston work. Most of them are used in the cylinder and cylinder movement executing parts. It is a moving part with frequent movement and high technical requirements.
 
 
 

• prev：Analysis of the causes of piston rod fracture at three point
• next：Introduction of stainless steel piston rod