Mechanical cylinder piston (piston) rod cover
The mechanical cylinder piston (piston) rod protector can effectively protect the cylinder, cylinder (compressed air), piston rod, screw, light bar, shaft, column and other parts are not affected by dust and other special infections and vandalism, It can be stretched or compressed with the components, either vertically or horizontally. The hydraulic piston rod improves the surface corrosion resistance and can delay the generation or expansion of fatigue cracks, thereby improving the fatigue strength of the cylinder rod. The 45# piston rod connects the piston and the crosshead to transmit the force acting on the piston and drive the piston to move. The hollow piston rod refers to a hollow piston rod having an annular cross section. The cylinder piston rod wear ring can improve the guiding of the cylinder, reduce the wear of the piston seal and reduce the frictional resistance. The piston rod of the cylinder has a piston rod at one end, and the air supply from the side of the piston generates air pressure, and the air pressure pushes the piston to generate a thrust and returns by the spring or the self weight. It is recommended to use a plastic or aluminum (Al) suspension ring for horizontal use, to maintain a certain distance between the inner cavity of the protective sleeve and the piston rod (jūn y & uacute; n), and to increase the life of the use. Piston rod expansion and contraction (extension and retraction metaphor within a certain limit) When the protective sleeve has a large tensile length, a metal ring can be added to each fold to improve the stability of the protective sleeve (interpretation: stable stability; no change) (The stability of). The metal flanges are usually used for the connected or fixed ends, and the ferrule type is also available. The mechanical cylinder piston rod protection sleeve is divided into two forms according to the processing method and also considering the different materials suitable for different processing techniques.   A piston rod telescopic protective sleeve supported by a steel ring. The piston rod protective sleeve is made of a variety of fabrics with a rigid wire ring support and can work normally at a high temperature of 110 ° C and a low temperature of -40 ° C. . It can effectively prevent dust, water, oil, emulsion and chemicals. The shield has the characteristics of neatness and deformation, and it is based on its tightness and firmness. It can be used for ventilation and dust removal of many machines. The flexibility of this product is not only material choice, but also the specific diameter and length that can be determined according to the specific requirements. The other is the sewing piston rod telescopic protective sleeve. The piston rod protective sleeve is made by punching the circular disc. The two inner edges are adjacent to each other, and the two outer edges are stitched together and sewn through (tōng guò) It can achieve better shape stability and firmness in the horizontal direction. Materials can be varied depending on the work environment.

• prev：All the techniques that should be in operation with stainles
• next：Correct understanding of the piston rod is not to talk about