Generally speaking, we all use piston rods in our work. Of course, we often encounter some problems in our work (Emerson), but if we say our equipment (shè bè ;i) There is a fatal problem that is bound to be a big blow to us, so we should also know how to solve these problems, let us know together. When the hollow piston rods have the same material and the cross-sectional area is equal, the hollow piston rod has stronger torsion resistance and can withstand large external moments. The piston rod of the cylinder has a piston rod at one end, and the air supply from the side of the piston generates air pressure, and the air pressure pushes the piston to generate a thrust and returns by the spring or the self weight. The cylinder piston rod wear ring can improve the guiding of the cylinder, reduce the wear of the piston seal and reduce the frictional resistance.
 
1,  The function of the gap in the piston rod
When we use the piston rod for machining, we should check to see if our technology passes the test. If it does not meet the standard, it will affect the quality of the piston rod. If it is serious, it may be ( Maybe) will have an impact on his life. Therefore, we generally use the rolling method to machine the piston rod. This method can be used to complete our work, and there is no such thing as corruption or cracking. Therefore, The help for us is relatively large. But we should also know that different gaps have different effects.
 
2,   piston rod leakage problem (Emerson)
If our piston (piston) rod has a problem with its sealing (Emerson), then there will naturally be a leak, but this will have a greater impact on our operations. The piston rod of the cylinder has a piston rod at one end, and the air supply from the side of the piston generates air pressure, and the air pressure pushes the piston to generate a thrust and returns by the spring or the self weight. In fact, in addition to the sealing property in the piston rod is the problem of wear (a basic type of component failure), so we should do it when designing the piston rod, otherwise we need to fix it. (fixed) or welding operations to make up for it, it is still more troublesome to think about it. So from here we can also see how important his performance is to our homework, so everyone should know what to do.
 
In normal times, we should also do a good job of maintaining the piston rod. If something goes wrong (Emerson), it should be handled and solved in time, otherwise the problem will only become more and more serious. The hydraulic piston rod cylinder, the piston rod (cylinder rod), the piston and the end cover are composed of several parts. If you have any questions, you can ask them.
 

• prev：Looking for the cause of the bending of the stainless steel
• next：Dealing with the problems caused by the piston rod operation