When we are using a stainless steel (stainless acid-resistant steel) piston (piston) rod, we should do a good job of inspecting him so that we can ensure our work. Going smoothly. The hydraulic piston rod improves the surface corrosion resistance and can delay the generation or expansion of fatigue cracks, thereby improving the fatigue strength of the cylinder rod. If you have problems (Emerson) in the course of your homework (guò ché ng), it is likely that it may be caused by our inspection work not being in place. So how do we do it?
      
1,  Stainless steel (stainless acid-resistant steel) piston (piston) rod matching problem
    In fact, we use stainless steel (stainless steel) piston (piston) rod. He does not work alone, we will use other auxiliary equipment, then this time involves a matching problem. . The 45# piston rod supports the connecting parts of the piston work. Most of them are used in the cylinder and cylinder movement executing parts. It is a moving part with frequent movement and high technical requirements. When we are matching, we should clean the piston and cylinder liner, then apply a cleaning machine in the place where the work is done, and then install the cylinder liner. If you find that the piston has fallen down (Condition) ), then it means that the direct cooperation between the piston and the cylinder liner is still possible. If it does not fall, it means that they are too tight. Of course, if the gap jumps, it is not a good thing, so we must be careful.
       
2,  stainless steel (stainless acid-resistant steel) piston (piston) rod treatment
     In the stainless steel (stainless steel) piston rod, we need to clean the piston rod and bushing, and wipe it clean, then apply oil on it, this is the basic work we should Do it. The piston rod of the cylinder has a piston rod at one end, and the air supply from the side of the piston generates air pressure, and the air pressure pushes the piston to generate a thrust and returns by the spring or the self weight. There is also that we can't let the thrust be too big. If it doesn't work well, then he will have the possibility of scratching. If it is too loose, then we have to re-match, so we can't be in this place. Wrong, if we don't do it, then our work is likely to need to be re-run, then this workload is relatively large. So I will remind everyone in this place.
     No matter how you used to operate the stainless steel (stainless acid-resistant steel) piston rod, but after (tōng guò) our introduction, you may wish to try it, maybe you will have new Find. The hydraulic piston rod cylinder, the piston rod (cylinder rod), the piston and the end cover are composed of several parts. The 45# piston rod supports the connecting parts of the piston work. Most of them are used in the cylinder and cylinder movement executing parts. It is a moving part with frequent movement and high technical requirements. Of course, you can also compare which method can be used to complete the work of our stainless steel piston rod

• prev：Do you know about the seals of stainless steel piston rods?
• next：What is the role of the connection mode of the piston rod?